Author Topic: What have you made? (Read 554314 times)

spakky · « **Reply #270 on:** June 18, 2012, 04:52:24 PM »

yeah just bowls for my bong. I just went out and got a drill bit but all the wood I have is too old and splits when I drill the holes.

@ss4oLe · « **Reply #271 on:** June 20, 2012, 04:17:27 PM »

Helping a friend install a keggerator in his RV. Thought this would be a good idea for the tap....

sokoloka · « **Reply #272 on:** June 20, 2012, 05:42:23 PM »

Quote from: Bunsincunsin;3565305

I just finished longboard number five. This one has the same specs as longboard number four but it has a book matched walnut veneer base. Probably the nicest board I've made in terms of functionality and aesthetics. The finish took forever to get to a point where I was actually satisfied with it; I was about to throw this thing through the window because of all the orange peel I was getting... This particular board is for my cousin. I'll try to get some photos of it when it gets built up.

Quick question - where does one buy nice hardwood stock like this? I have a few projects in mind for when I move back to the states but have no idea where to buy material like this (that's not plywood).

@ss4oLe · « **Reply #273 on:** June 20, 2012, 05:44:55 PM »

Lumber yard.

Bunsincunsin · « **Reply #274 on:** June 20, 2012, 07:34:01 PM »

Quote from: sokoloka;3570723

Quick question - where does one buy nice hardwood stock like this? I have a few projects in mind for when I move back to the states but have no idea where to buy material like this (that's not plywood).

Do you mean veneer or actual dimensioned hardwood? I buy from Crosscut Hardwoods because they're local, they have decent prices and a great selection. All of the veneer I've bought has come from Woodcraft as packs of about 12 sq. feet; they also carry dimensioned lumber. I'm sure there's some place similar to Crosscut Hardwoods in your area... Or, if you're looking for some really nice veneer check out Veneer Supplies.

If you're talking about 1/16" Canadian Maple veneer (which is what is most often used for skateboards) there are very few places that sell it and it tends to be fairly expensive. Roarockit is one place I know of...

Thepoolman · « **Reply #275 on:** June 20, 2012, 09:02:56 PM »

4x5 " Tintype

brian itzaina · « **Reply #276 on:** June 26, 2012, 11:55:17 PM »

Haven't started nor am I making anything but more so restoring in a sence.

http://www.flickr.com/photos/somuchforsale/7452458430/" title="IMAG0120 by veloreality, on Flickr">

http://farm8.staticflickr.com/7137/7452458430_788a42d786_b.jpg" width="612" height="1024" alt="IMAG0120">

I pulled this cart out of the trash today.
Its rusty but just enough for ther paint to be falling off.
Not sure what direction I want to go, all I want is to make it look cool and continue to funtion in the garage.

I plan to re cover it with the plywood afer Idistress & stain it.
Any suggestions as far as paint or finish overall would be awesome to help.

blueee · « **Reply #277 on:** June 27, 2012, 12:11:28 AM »

i just made sooooooo much pizza sauce, shit is soooo goood. shoulda put way more serranos though... still pretty damn spicey tho

brian itzaina · « **Reply #278 on:** June 28, 2012, 05:36:02 PM »

Finishing tonight hopefully
http://www.flickr.com/photos/somuchforsale/7463225896/" title="PhotoGrid_1340920672618 by veloreality, on Flickr">

http://farm9.staticflickr.com/8166/7463225896_4042dba56d.jpg" width="480" height="480" alt="PhotoGrid_1340920672618">

Moshrides1 · « **Reply #279 on:** June 28, 2012, 06:05:21 PM »

Automatic Soda crusher.

BOUNCEHOUSE420 · « **Reply #280 on:** June 28, 2012, 10:36:42 PM »

tie rods almost done... pure beef

BOUNCEHOUSE420 · « **Reply #281 on:** June 28, 2012, 11:53:03 PM »

size comparison with piss beer

drewfunk · « **Reply #282 on:** June 29, 2012, 01:07:39 PM »

Working on building a seat for my XS650, currently cutting out a seat pan.

blueee · « **Reply #283 on:** June 29, 2012, 01:33:38 PM »

Quote from: BOUNCEHOUSE420;3572891

size comparison with piss beer

aww fuck, i saw that and thought you made a beer can opener

BOUNCEHOUSE420 · « **Reply #284 on:** June 29, 2012, 02:16:34 PM »

they could be used for opening lots of things

Bikeguide.org - Bike maintenance for BMX'ers · « **Reply #284 on:** June 29, 2012, 02:16:34 PM »

Author Topic: What have you made? (Read 554314 times)

BOUNCEHOUSE420

BOUNCEHOUSE420

BOUNCEHOUSE420

Bikeguide.org - Bike maintenance for BMX'ers