Author Topic: What did you do to your bike today? (v2) (Read 2275776 times)

paranoidmexican · « **Reply #2910 on:** February 22, 2013, 07:23:37 AM »

Quote from: Phil Medeep;3632958

Need to figure out a NEW CHEAP STRONG BRAKEFRiENDlY rim to lace to my animal cassette.

$15
http://www.danscomp.com/products-PARTS/422040/Hoffman_Generator_Rim.html

Gary · « **Reply #2911 on:** February 22, 2013, 03:55:42 PM »

Put on some new soft compound longnecks. Took my bike apart too regrease everything. Put on a Gsport gland and another peg on the front. Going to order a Driveside guard for it soon, My opposite grinds suck :0

bluebmx · « **Reply #2912 on:** February 22, 2013, 04:16:31 PM »

replaced my wrecked par ends with one brand new par end and one pretty used, but not as bad par end. It's what I had laying around.

CMB · « **Reply #2913 on:** February 22, 2013, 05:58:53 PM »

Put my bike back together along with a new Bluebird chain and 2.25 Fly Ligera/ 2.10 FAF-k tires. My bike feels smoother than it has in a while.

pshep138 · « **Reply #2914 on:** February 22, 2013, 06:11:03 PM »

I put my third peg and third BSD guard on.

master · « **Reply #2915 on:** February 22, 2013, 06:12:15 PM »

Bought a sprocket!

Thepoolman · « **Reply #2916 on:** February 22, 2013, 10:23:17 PM »

took it out of the storage room and manualed around my apartment ( i live in a huge warehouse space)... did some flat ground tricks... 360, underhand 360... it needs to stop being cold as shit

did a wallride a week or so ago in portland on a 24" bmx in work boots at night... on a massive wallride... havent ridden since sept. and never on a 24.

PabstBlueRibbon · « **Reply #2917 on:** February 22, 2013, 11:50:47 PM »

used an empire shoe lace to hold my brake cable to my frame

GUMP_ · « **Reply #2918 on:** February 23, 2013, 05:50:36 AM »

Rawed and attempted to polish my seat post and seat clamp. Removed one spacer from underneath the stem.

Attempted to move my ramps. Realized i am not as strong as the 3 guys who helped me move them in the first place.

jamie_bkc · « **Reply #2919 on:** February 23, 2013, 09:53:42 AM »

Split my old bike apart to put some bits on a sunday scout complete I got on clearance, debating between which wheels to keep; my old but still ok rhynolite on proper and hazard lite on V3 or the new wheels that came on the trail scout, some generic but well put together sealed cassette hubs with quadrant rims.

Craig Slist · « **Reply #2920 on:** February 23, 2013, 01:06:15 PM »

Finished my ratchet,squared flanges are so 2012

DontcallmeKenneth · « **Reply #2921 on:** February 23, 2013, 01:28:52 PM »

Got my chromoly replacement axle for my n4fl I had to grind down due to some fucked up threads. Empire is sending me the female axle kit when the restock them due to a slight mixup. Can't wait until my wheels are nice and trued so I can throw the Rubens on. Wonder if 2.3 momentums will fit on a slammed btm?

The Radness · « **Reply #2922 on:** February 23, 2013, 04:49:05 PM »

I think the BTM was the only frame momentums fit on when they first came out?

CMB · « **Reply #2923 on:** February 25, 2013, 04:10:43 PM »

Stripped the flouro-green off my frame because I hated it haha. Back to raw!

attactrl · « **Reply #2924 on:** February 25, 2013, 04:21:52 PM »

Pedaled my new bike over to the nearest wifi and sent this.

Finally have another bike built up, it's the tits. 0 money invested, will post a check when I find my damn phone.

Also on the trail of my stolen Solid. My parts are starting to show up.

Bikeguide.org - Bike maintenance for BMX'ers · « **Reply #2924 on:** February 25, 2013, 04:21:52 PM »

Author Topic: What did you do to your bike today? (v2) (Read 2275776 times)

pshep138

Bikeguide.org - Bike maintenance for BMX'ers