Author Topic: Quick Questions (Read 936696 times)

Sasha · « **Reply #330 on:** July 30, 2012, 06:06:12 AM »

Put the adapter through the other side of the sprocket.

Jens M · « **Reply #331 on:** July 30, 2012, 06:29:49 AM »

Quote from: Sasha;3577259

Put the adapter through the other side of the sprocket.

I shall try that. Took forever to get it out of the old sprocket and into the new one though.

weedbix · « **Reply #332 on:** July 30, 2012, 07:12:15 AM »

You could eliminate the spacer for the sprocket bolt entirely if you got a a grub screw or a bolt long enough to bottom out inside the crank arm before it hit the sprocket

The Bike Shop > Common Questions and former stickies. > common bearing and bolt/nut sizes

Jens M · « **Reply #333 on:** July 30, 2012, 07:37:29 AM »

That's very true.

JohnW · « **Reply #334 on:** July 30, 2012, 11:18:59 AM »

Quote from: Professor Horatio Hufnagel;3577263

You could eliminate the spacer for the sprocket bolt entirely if you got a a grub screw or a bolt long enough to bottom out inside the crank arm before it hit the sprocket

Charles over at B6 made me a Ti one of these for my Twombolts. I love it.

Jens M · « **Reply #335 on:** July 31, 2012, 01:30:15 AM »

Quote from: Sasha;3577259

Put the adapter through the other side of the sprocket.

This worked. Cheers

Topsey · « **Reply #336 on:** July 31, 2012, 11:07:34 AM »

Just got my Cult Sect V2 fork & the drop outs are TINY, ive emailed Cult but i thought id try here also.. Is anyone running Butcher pegs with sleeves on sect v2 forks?

Cheers.

Gooby · « **Reply #337 on:** July 31, 2012, 01:16:42 PM »

Quote from: Topsey;3577550

Just got my Cult Sect V2 fork & the drop outs are TINY, ive emailed Cult but i thought id try here also.. Is anyone running Butcher pegs with sleeves on sect v2 forks?

Cheers.

In that new Fox edit Hawk is running butchers, so I'd assume that they work!

Topsey · « **Reply #338 on:** July 31, 2012, 01:19:24 PM »

I have a feeling Mr.Hawk is running odyssey forks :/

Rusty · « **Reply #339 on:** July 31, 2012, 02:00:56 PM »

If I wanna JB weld my powerbite pedal boss do I just smear some all over it or is there an actually art of doing it?

brian itzaina · « **Reply #340 on:** July 31, 2012, 02:13:14 PM »

Jb weld the shit out of all the threads.
Crank that bitch tight ass fuck
allow more then enough time to bond

if a pedal is stuck remove then

Rusty · « **Reply #341 on:** July 31, 2012, 02:20:45 PM »

The threads where the pedal goes in? Or actually take the pedal boss out and do those threads?

Gary · « **Reply #342 on:** July 31, 2012, 03:41:46 PM »

Quote from: Rusty;3577586

Or actually take the pedal boss out and do those threads?

This

Sasha · « **Reply #343 on:** July 31, 2012, 03:43:52 PM »

Yeah, don't JB weld your pedal on.

CMB · « **Reply #344 on:** July 31, 2012, 09:13:54 PM »

Anyone know the biggest tire I can fit in the rear on a fit CR24?

Bikeguide.org - Bike maintenance for BMX'ers · « **Reply #344 on:** July 31, 2012, 09:13:54 PM »

Author Topic: Quick Questions (Read 936696 times)

Bikeguide.org - Bike maintenance for BMX'ers