Author Topic: Quick Questions (Read 922677 times)

Gooby · « **Reply #450 on:** November 14, 2012, 07:09:23 PM »

Please get the OZ leather brown... I wish we could get it in the states.

paranoidmexican · « **Reply #451 on:** November 14, 2012, 07:18:34 PM »

doing 180's, i turn out the opposite way i spin. am i retarded?

Gooby · « **Reply #452 on:** November 14, 2012, 07:24:34 PM »

Quote from: paranoidmexican;3607418

doing 180's, i turn out the opposite way i spin. am i retarded?

Youre doing it right.

paranoidmexican · « **Reply #453 on:** November 14, 2012, 08:51:28 PM »

Gooby pls....some kid called me an indian giver :-/

Trent · « **Reply #454 on:** November 14, 2012, 09:00:22 PM »

Just practice doing rollouts the other way on a bank or something.
Eventually it gets easier cause its more of a fluid motion to continue the rollout the way you spun.

CHROME_RIMS_YO · « **Reply #455 on:** November 15, 2012, 01:32:40 AM »

since the BG mainpage is now The Union's mainpage i can't find the chart that lists rear end length for different gear ratios. i'm trying to figure out what a 10/29 would slam at though, so any help could be appreciated. i don't have a 29t sprocket yet, otherwise i'd measure that shit myself. i'm assuming i can just add a half link to my chain and have my axle stay in the same spot (slammed), but i wanted to be sure.

Gooby · « **Reply #456 on:** November 15, 2012, 01:41:09 AM »

Quote from: CHROME_RIMS_YO;3607492

since the BG mainpage is now The Union's mainpage i can't find the chart that lists rear end length for different gear ratios. i'm trying to figure out what a 10/29 would slam at though, so any help could be appreciated. i don't have a 29t sprocket yet, otherwise i'd measure that shit myself. i'm assuming i can just add a half link to my chain and have my axle stay in the same spot (slammed), but i wanted to be sure.

Wouldn't you also need to know the rear end length to calculate it? Assuming its a 13.75" rear end you should be right around 13.85" with out half link, and you should be slammed with a half link. These are just rough estimates but you get the idea.

CHROME_RIMS_YO · « **Reply #457 on:** November 15, 2012, 03:27:20 AM »

i found my answer on gsport's site. . thanks for the help gooby, this shit made little to no sense to me before tonight haha.

Hail Satan · « **Reply #458 on:** November 15, 2012, 03:56:47 AM »

http://eehouse.org/fixin/formfmu.php
use this for all your gear needs... includes half links and all that jazz. also, set it to display as tabulated text for clarity.

Wrecked · « **Reply #459 on:** November 15, 2012, 09:39:52 AM »

Has anyone run a set of brakes on an Alienation Deviant rim.
I know the rims are terrible but it's what I have available to run with a front break setup. I don't want to crush the rim.

Brendan O. · « **Reply #460 on:** November 18, 2012, 04:02:15 AM »

My profile crank arm sits kinda loose on the spindle. Left to right is tight, it just rocks back and forth in the circular direction a bit, like the splines on the spindle wore out. Is this the so-much-talked-about Profile Wobble? What's a generic fix?

Gary · « **Reply #461 on:** November 18, 2012, 07:56:16 AM »

Quote from: Brendan O.;3608262

Is this the so-much-talked-about Profile Wobble? What's a generic fix?

Yeap, that's exactly what it describes. I fixed my 41 Thermals using 271 Loctite. the 242 didn't seem too hold.
http://www.loctiteproducts.com/p/10/15/t_lkr_red/overview/Loctite-Threadlocker-Red-271.htm

My V2 Fly cranks seemed like they were beyond Loctite I used JB Weld on the spindle crank interface. That was more of a permanent fix. Just holding me over until I get new cranks

Brendan O. · « **Reply #462 on:** November 18, 2012, 06:00:12 PM »

Allright thanks. I was afraid this day would come. I see there is one 1mm ring inbetween the crankarm and the conical spacer so I'll try removing that first and see if it helps. The spindle is titanium so I wouldn't like messing around with that too much. Is it usually the splines on the crankarm or the splines on the spindle that wear out?

Trent · « **Reply #463 on:** November 19, 2012, 10:45:27 AM »

I need a metal guard for a wtp supreme front hub. What fits?

KillSeth · « **Reply #464 on:** November 20, 2012, 07:32:15 AM »

Steve-O bike check on Ride today:

Why run so many tall headset spacers and then flip your stem?

Bikeguide.org - Bike maintenance for BMX'ers · « **Reply #464 on:** November 20, 2012, 07:32:15 AM »

Author Topic: Quick Questions (Read 922677 times)

Hail Satan

Bikeguide.org - Bike maintenance for BMX'ers