Author Topic: Quick Questions (Read 922700 times)

GUMP_ · « **Reply #210 on:** May 04, 2012, 08:51:43 AM »

Am I going to loose to many bg points by running a 9 tooth 48 spoke ratchet on a old sunday frame with a 30 t mds?

Sasha · « **Reply #211 on:** May 04, 2012, 09:03:35 AM »

That's like, infinity BG points.

weedbix · « **Reply #212 on:** May 04, 2012, 09:12:21 AM »

By the sounds of it you'll lose negative points

GUMP_ · « **Reply #213 on:** May 04, 2012, 10:47:33 PM »

I thought the 9t might work against me. Can't wait to build the bike up

barcodebilly · « **Reply #214 on:** May 05, 2012, 12:50:51 AM »

You will have an abundance of cool points coming your way

attactrl · « **Reply #215 on:** May 05, 2012, 12:55:19 AM »

Quote from: GUMP_;3556084

I thought the 9t might work against me. Can't wait to build the bike up

I thought it was cool to have a small crank.

GUMP_ · « **Reply #216 on:** May 05, 2012, 01:14:55 AM »

9t is small child cool. 10t is basic driver size for bg, cool points start there and increase with each extra tooth

Lettusdude · « **Reply #217 on:** May 05, 2012, 01:31:42 AM »

Speaking of 10t, are 10t ratchets or even just the drivers in production any more? I'm having trouble finding one. I'd be fine with 28/9, but I love my brake too much(chainstay brakes with little clearance)

GUMP_ · « **Reply #218 on:** May 05, 2012, 02:06:02 AM »

I thought I saw one on empire but they only have 9t now maybe dans?

Topsey · « **Reply #219 on:** May 05, 2012, 10:52:23 AM »

Madera 3/8ths Hubs with Hub Guards & Blue6 Ti Hex Head Bolts = Pegable?

attactrl · « **Reply #220 on:** May 05, 2012, 10:55:23 AM »

I did it for a while. I broke a couple bolts(tightening them every time), and the center axle eventually.

Topsey · « **Reply #221 on:** May 05, 2012, 11:13:34 AM »

Hmmm, well i only ride once or twice a week. Not super heavy on my pegs & i highly doubt i could break a blue6 bolt & if i did they'd be replaced for free. It is the center axle that im worried about. Ill give it a think, Cheers.

Edit: Wonder if Couch could make me custom axles for the madera hubs?

JohnW · « **Reply #222 on:** May 05, 2012, 11:27:35 AM »

I'm sure he could. It's 17mm at the ends and 14mm in the center. 14mm thick aluminum is just not enough for pegs. The early Fly axles tapered to 15mm in the middle from 17 and they broke a lot. You've got 2 good options there. Chromoly axle the size of the stock one with 17mm outer and 14 or 15mm inner, or 17mm aluminum all the way through. I'd suggest 3/8x24 either way. With 17mm 7075 all the way through you'd have the axle strength of the Vandero 2.

Topsey · « **Reply #223 on:** May 05, 2012, 11:35:35 AM »

Thats pretty much what i was thinking John, Then if its possible (which im sure it will be) Getting a 3/8ths to 14mm Axle adaptor on the hub & cog guards & running 3/8ths pegs in the rear.

JohnW · « **Reply #224 on:** May 05, 2012, 04:19:37 PM »

Yeah, they're borderline in the front with the Race axle and pegs. I wouldn't even consider it in the rear.

You could have a Profile chromoly axle cut, drilled, and tapped for bolts. But with the price of the axle, it could even cost less to have one made out of 4130 stock.

Bikeguide.org - Bike maintenance for BMX'ers · « **Reply #224 on:** May 05, 2012, 04:19:37 PM »

Author Topic: Quick Questions (Read 922700 times)

barcodebilly

Bikeguide.org - Bike maintenance for BMX'ers