Author Topic: Quick Questions (Read 923509 times)

haaasselt · « **Reply #285 on:** June 18, 2012, 12:41:40 PM »

http://www.empirebmx.com/store/comersus_viewItem.asp?idProduct=9246
anyone know where I can get a non ti bolt like that? a broached bolt for a front profile mini

Trail-Boss · « **Reply #286 on:** June 19, 2012, 02:49:45 AM »

With the adapter no where that I know of... But you can get them with just the hex at a hardware store.

Gary · « **Reply #287 on:** June 19, 2012, 05:30:26 PM »

Doesnt Blue six make chromoly bolts

Edit http://www.empirebmx.com/store/comersus_viewItem.asp?idProduct=9881

weedbix · « **Reply #288 on:** June 19, 2012, 06:55:24 PM »

Quote from: bmxelement;3569902

i shouldn't need any tophat spacers when installing a million dollar sprocket to thunderbolts do I?

You'll have to press the sprocket on, read the manual

Rusty · « **Reply #289 on:** June 20, 2012, 12:42:01 PM »

Quote from: Rusty;3569859

Wheres the cheapest place I can find a pair of big drop bars online?

I also want something that will fit a generic BMX stem.

paranoidmexican · « **Reply #290 on:** June 20, 2012, 07:50:47 PM »

Quote from: Professor Horatio Hufnagel;3570521

You'll have to press the sprocket on, read the manual

just saw that. thanks!

Ruben José · « **Reply #291 on:** June 20, 2012, 08:04:02 PM »

is normal that my 41thermal cranks being so tight when i try to put in the spindle? anyone had this problem?

weedbix · « **Reply #292 on:** June 20, 2012, 10:14:22 PM »

That's completely normal for spline cranks without pinch bolts. You want it to be as tight as possible in fact

paranoidmexican · « **Reply #293 on:** June 21, 2012, 01:03:16 PM »

is this right? the spacer is big enough, do the ends of the wedge cluster stick out a little or am I doing something wrong? i followed the instructions and watched jim bauer install twombolts in a video.

Topsey · « **Reply #294 on:** June 21, 2012, 01:22:07 PM »

From my limited knowledge of Odyssey cranks & just watching the video, it looks pretty good.

andrew. · « **Reply #295 on:** June 21, 2012, 02:28:25 PM »

Mine look like that. Been riding them since Christmas time no problem.

Louis · « **Reply #296 on:** June 21, 2012, 05:37:24 PM »

Yes that's fine. More important is spacer thickness as you mentioned. If you haven't; remove the bolt, how close is the spindle to contacting the underside of the bolt? you dont want the spindle to bottom out on the bolt. or the bolt to bottom out on the spindle however you want to think about it.

circuithero21 · « **Reply #297 on:** June 21, 2012, 06:03:13 PM »

Quote from: Rusty;3570658

I also want something that will fit a generic BMX stem.

I don't think any drop bars come in a 22.2 clamp diameter.

Rusty · « **Reply #298 on:** June 22, 2012, 01:33:32 PM »

Quote from: circuithero21;3571003

I don't think any drop bars come in a 22.2 clamp diameter.

Darn, well with more thought a BMX stem would make it look stupid anyway. I found these on Amazon. Anyone know anyting about them? Like I said I want something big.

Ruben José · « **Reply #299 on:** June 22, 2012, 02:16:31 PM »

anyone knows the diameter of the o-ring to get the jpcs wooblen free?

Bikeguide.org - Bike maintenance for BMX'ers · « **Reply #299 on:** June 22, 2012, 02:16:31 PM »

Author Topic: Quick Questions (Read 923509 times)

andrew.

Bikeguide.org - Bike maintenance for BMX'ers