Author Topic: Quick Questions (Read 922634 times)

DCBMX · « **Reply #555 on:** January 19, 2013, 07:24:55 PM »

will the profile 3/8th volcano front hub axle nuts work on an Odyssey Vandero 2 front hub?

mrjimyjohn · « **Reply #556 on:** January 19, 2013, 07:45:07 PM »

Quote from: DCBMX;3625604

will the profile 3/8th volcano front hub axle nuts work on an Odyssey Vandero 2 front hub?

No. Profile uses 16tpi for whatever reason, whereas Odyssey and everyone else use 24tpi.

DCBMX · « **Reply #557 on:** January 19, 2013, 07:48:49 PM »

lame. does anybody know where I can get green 24tpi front hub bolts?

mrjimyjohn · « **Reply #558 on:** January 19, 2013, 08:03:07 PM »

Do the tree bolts come in green? if not I don't think there are, unfortunately.

DCBMX · « **Reply #559 on:** January 19, 2013, 08:16:03 PM »

nope no green, god dammit

mrjimyjohn · « **Reply #560 on:** January 19, 2013, 08:18:13 PM »

You might be able to use the profile volcano washers if you can find some green ones, and use 3/8" x 24tpi studs instead of the profile ones. I'm not completely sure they'll fit, but it might be worth a try if you get desperate, haha.

Sasha · « **Reply #561 on:** January 20, 2013, 04:26:03 AM »

Quote from: Kinchy;3624140

probably 26 or 27.something

Take it to a bikeshop, bikeshop employees usually don't smoke so their sense of smell is better

Quote from: paranoidmexican;3624142

take your bike to the bike shop and have them show you what size seat post you need?

Put my BMX seat post in and it was a bit too small so I bought a 25.8mm post, that was too big so I just forced it in there. All is well now.

weedbix · « **Reply #562 on:** January 20, 2013, 04:42:49 AM »

Might be a bitch to get back out

Sasha · « **Reply #563 on:** January 20, 2013, 05:05:37 AM »

I'll worry about that later.

Tony Harrison · « **Reply #564 on:** January 20, 2013, 05:39:12 AM »

Quote from: mrjimyjohn;3625627

You might be able to use the profile volcano washers if you can find some green ones, and use 3/8" x 24tpi studs instead of the profile ones. I'm not completely sure they'll fit, but it might be worth a try if you get desperate, haha.

http://www.ebay.co.uk/itm/Diabolic-titanium-bmx-female-hub-bolts-16-TPI-american-profile-stealth-king-/200747467495?pt=Cycling_Parts_Accessories&hash=item2ebd7b42e7

quickest of googles

DCBMX · « **Reply #565 on:** January 20, 2013, 09:09:57 AM »

those are 16 tpi

edit: but wait! http://www.ebay.in/itm/260961989345

Sasha · « **Reply #566 on:** January 21, 2013, 08:43:56 AM »

Anyone ever rawed/polished a rim? I want to do at least my back one, is it hard? I assume it'll be the same as anything, I'll just need a bigger tub? I have Fly rims too so it should be double fun.

mrjimyjohn · « **Reply #567 on:** January 21, 2013, 02:35:22 PM »

I was considering trying this but I decided I wasn't up for rebuilding my wheels. Let us know how it goes though, I might try it eventually too. I would assume just the usual oven cleaner or whatever it is that you prefer to use...

Kinchy · « **Reply #568 on:** January 21, 2013, 02:38:39 PM »

Is it painted or anodized? I'm about to raw some painted rims but thats just going to be a case of Nitro Mors.

Related question: What should I use to protect the metal, if anything?

mrjimyjohn · « **Reply #569 on:** January 21, 2013, 03:09:21 PM »

Quote from: Kinchy;3626046

Is it painted or anodized? I'm about to raw some painted rims but thats just going to be a case of Nitro Mors.

Related question: What should I use to protect the metal, if anything?

Nitromors shouldn't do anything to aluminum really, I'd say just clean the rims off real good when you're done to make sure there's no residue or anything.

Bikeguide.org - Bike maintenance for BMX'ers · « **Reply #569 on:** January 21, 2013, 03:09:21 PM »

Author Topic: Quick Questions (Read 922634 times)

Bikeguide.org - Bike maintenance for BMX'ers