The "what the hell is Odyssey / Gspprt cooking up" thread.

[bluebmx]

Clearly my intel was weak on that profile coaster, even though I heard it front he guy that brought profile the design. Weird.

[dude...]

13.2mm offset directors with 12mm dropout slots and disc mounts plz or im never buying odyssey stuff again

[G]

I need to see what we are revealing at Interbike before I put anything too major here, but I can tease some of the differences:-

There are a few standard industrial bearings, bolts from our other hubs etc, but otherwise the ONLY part that is interchangeable with other hubs is the hub shell liner.

There are no 6802 bearings in it.

The lowest rated bearing in it is rated at 6000 Newtons.

The silver ring is not just for show.


G.

http://instagram.com/p/s0CPg8NWNc/


G.

[torontoflatlander]

I am crying tears of joy on the inside Mr. French. Had I been within your proximity I would hug you.

[Stoked]

G can we get some side by side comparison shots of the dugan pedal and a trailmix? TY

[Admiral Ackbar]

there are some on g's instagram, i think he's gsportgeorge on there

[G]

G can we get some side by side comparison shots of the dugan pedal and a trailmix? TY

there are some on g's instagram, i think he's gsportgeorge on there

Yes.

http://instagram.com/gsportgeorge


G.

[MEAT]

Did baking the freezers pcb work?

[JFax]

I love large pedals. If this is larger than the twisted it will be my next pedal

[@ss4oLe]

How concave are those pedals?

[G]

Did baking the freezers pcb work?

Did it fuck.... well actually it did fix the eratic behaviour of the control unit, but it also confirmed that the refrigerant has probably leaked, which is the bigger problem. Was worth a shot.

I love large pedals. If this is larger than the twisted it will be my next pedal

It is.

A good 8mm in both width and length.... but about 7mm thinner too.

How concave are those pedals?

That is a hard thing to quantify, its a dual/full-360degree concave. Middle is about 3mm lower than the outer corners, where the Trailmix was about 2mm lower in the middle than at the inner and outer edges (the Trailmix are single-axis concave).
In other words, more, they feel great.


G.

[bsd510]

I love large pedals. If this is larger than the twisted it will be my next pedal

It is.

A good 8mm in both width and length.... but about 7mm thinner too.

When you say 7mm thinner, are you talking about the actual height of the pedal body, or the thickness of the plastic in relation to the axle. I am really interested in the dugan pedals, but I also love pedal grinding so a thicker plastic to grind through is pretty important for me. For example my fly pedals only lasted a few grinds before I wore them down till there was nothing left, whereas my eclats have been going strong for about a year. Thanks G!

[G]

I love large pedals. If this is larger than the twisted it will be my next pedal

It is.

A good 8mm in both width and length.... but about 7mm thinner too.

When you say 7mm thinner, are you talking about the actual height of the pedal body, or the thickness of the plastic in relation to the axle. I am really interested in the dugan pedals, but I also love pedal grinding so a thicker plastic to grind through is pretty important for me. For example my fly pedals only lasted a few grinds before I wore them down till there was nothing left, whereas my eclats have been going strong for about a year. Thanks G!

Actual body thickness. There is more thickness over the "guts" than the twisted (depending how and where you grind).


G.

[Thomas031]

Before my next cassette purchase, i just need to know if a plastic Antigram hubguard is still in the works.
There were posts of Aaron Ross supposedly running one in dec. 2012?

Please make a poor man happy today G!

Coming from plastic hubguards going to alu makes zero sense in my mind, haha.
Such a smooth slide to it. Better than unprotected sex

[peggiesmalls]

Bsd had one on show at interbike don't know if its already available ,js