Profile bolt question

[stevefromtexas]

So I'm trying to get a bolt with the 14mm adapter so I can run pegs but want to know if I can get a bolt a lowes or Home Depot so I don't have to spend 12 bucks for one bolt has anyone found these at those stores? I'm looking for the one with 14mm with peg adapter.

[cmc4130]

So I'm trying to get a bolt with the 14mm adapter so I can run pegs but want to know if I can get a bolt a lowes or Home Depot so I don't have to spend 12 bucks for one bolt has anyone found these at those stores? I'm looking for the one with 14mm with peg adapter.

You're talking about these?
http://www.profileracing.com/estore/product.php?productId=353

The main issue is that they're chromoly. If you go to Home Depot, you'll be buying cheap steel ones.  It's downright scary to think of a peg snapping off mid-grind.

[Narcoleptic Insomniac]

http://www.profileracing.com/estore/product.php?productId=140

He's talking about C or F. F takes a 8mm Allen key or a 17mm socket. I'm not sure what Allen size you need for C.

But yeah, as far as I know your only option is to pay profile's extortion price.

[master]

http://www.profileracing.com/estore/product.php?productId=140

He's talking about C or F. F takes a 8mm Allen key or a 17mm socket. I'm not sure what Allen size you need for C.

But yeah, as far as I know your only option is to pay profile's extortion price.

Profile's extortion price is because it's a standard thread bolt, with a metric broached head. Aka it's a fully custom machined bolt.

[Narcoleptic Insomniac]

Fair enough.

Are the button bolts metric headed as well?

[weedbix]

Hi ten steel will work fine

Profile are still too expensive even after considering they aren't off the shelf bolts

[master]

I say just go grab some grade 8 bolts with 3/8-16 threads, and run 3/8 to 14mm spacers in the dropouts.