Others > Bike Gallery
Post your custom made bmx frames !
Cellmember:
Just as the title specifies, if you had/have a custom made frame post it up, include the builder who made it and specifications of the frame and why you chose what you chose if you like.
If this thread has been made up already apologies in advance, plus I'm not sure if this is the correct place to start this thread, seemed the most logical, if it needs moving please let me know.
I'll start first.
Very first custom frame I had made was from Solid Bikes which was from 2009-10
Spec's
TT: 20.6"
HT: 75
ST: 71
BBH: 11.75"
SOH: 7.4" C2C
CSL: 13.375"
Tubing
Super therm, double butted.
TT: 32mm
DT: 35mm with solid gusset
SS/CS: 19mm
SS/CS B: 19mm
ST: 25.4mm externally butted made for wedge post
DO: Cult with built in tensioners, 5mm thick, 14mm slot
Tyre Clearance: 2.2" Max
HT: Integrated 45/45, removable gyro tabs
BB: Spanish, 68mm
Brakes: Chainstay mounted, welded
Cable Stop: Welded
Chainstay lowered on the BB to clear 25/9 ratio
Second custom was from Embassy Bikes made just last year 2014
Spec's
TT: 20.6"
HT: 75
ST: 71
BBH: 11.55"
SOH: 7.6" C2C
CSL: 13.20"
Tubing
4130 Straight gauge, 1.2mm
TT: 32mm
DT: 35mm
SS/CS: 19mm
SS/CS Bridges: curved 19mm
ST: 25.4mm wedge ready
DO: Tierra dropouts with integrated chain tensioners, 7mm thick, 14mm slot
Tyre Clearance: 2.3" Max
HT: Integrated 45/45, removable gyro tabs
BB: Spanish, 68mm
Brakes: Seatstay and Chainstay mounted brakes, removable fly dylan style
Cable Stop: removable fly guiri TT and DT
Chainstay lowered on the BB to clear 25/9 ratio
Brooklynrider:
--- Quote from: Cellmember on February 18, 2015, 09:15:56 PM ---
--- End quote ---
I'm no expert on welding but isn't welding through metal bad?
Cellmember:
--- Quote from: Brooklynrider on February 19, 2015, 12:01:26 AM ---
--- Quote from: Cellmember on February 18, 2015, 09:15:56 PM ---
--- End quote ---
I'm no expert on welding but isn't welding through metal bad?
--- End quote ---
I'm not sure but I can't imagine it being good, notice no venting holes, dude I got the frame made up from completely fucked it.
Dr. Steve Brule:
My old Limit. 10 years old or so now.
KillSeth:
Cellmember, so many questions. Why does one frame have zero seat tube and the other have way too much? Why does the second frame have both chainstay and seatstay mounts? Did the tensioners on the Solid frame actually work?
Navigation
[0] Message Index
[#] Next page
Go to full version