Others > Bike Gallery
Post your custom made bmx frames !
LeonLikesToRock:
FBM #125 from when Spooky Dave was still working there.
21 3/8 tt (rides just over 21 because of the laid back post), 75 regular ht, 69 st, 14" cs 11 5/8" Mid bb, 10mm drops, 9.25" SOH. Chainstay plates. .049" on the chain and seat stays. Chain stays taper from 7/8 to 5/8 and seat stays taper from 3/4 to 5/8. I think it is 1 3/8 x .042"ish for the front end, it is straight gauge supertherm from what I understand.
Custom Solid
2005 21.25 Killing Machine with mid BB and integrated headset. Most of the specs were the same as the Killing Machine but it has a 71 Seat tube angle and no hole in the seat tube for cable routing. I ordered dropouts that met flush with the peg but were regular length. I think the back end is around 14" maybe 13.75".
conormckeon:
--- Quote from: Cellmember on February 23, 2015, 08:34:18 PM ---
--- Quote from: conormckeon on February 20, 2015, 08:30:10 AM ---Just emailed Dave at Pedal driven with my specs. Custom is on it's way!
--- End quote ---
Nice, what spec's have you opted for ?
--- End quote ---
75* head tube angle
21" toptube
70* seat tube
11.5 BB height
13.5 chain stay
9.5” standover height
Mid bb
Basically the same geo as my frame now but with a taller stand over.
weedbix:
--- Quote from: Cellmember on February 23, 2015, 08:36:17 PM ---Nice, a 76 HT back then would have been unheard of.
--- End quote ---
You'd be surprised
badlight:
Leon, that "barcode" looks sick, but does your stem clear the gusset?
Cellmember:
--- Quote from: LeonLikesToRock on February 24, 2015, 01:27:25 AM ---FBM #125 from when Spooky Dave was still working there.
21 3/8 tt (rides just over 21 because of the laid back post), 75 regular ht, 69 st, 14" cs 11 5/8" Mid bb, 10mm drops, 9.25" SOH. Chainstay plates. .049" on the chain and seat stays. Chain stays taper from 7/8 to 5/8 and seat stays taper from 3/4 to 5/8. I think it is 1 3/8 x .042"ish for the front end, it is straight gauge supertherm from what I understand.
Custom Solid
2005 21.25 Killing Machine with mid BB and integrated headset. Most of the specs were the same as the Killing Machine but it has a 71 Seat tube angle and no hole in the seat tube for cable routing. I ordered dropouts that met flush with the peg but were regular length. I think the back end is around 14" maybe 13.75".
--- End quote ---
Damn fine rides for sure !
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version