Keychain woes?

[streetStreet]

Quick question

Ive only got a park CT7 chain breaker and the adapter does not fit. Can I just use the CT7 pin to rlove links?

[thirks]

had similar issues, straightened up my chainline as much as possible and the problem lessened. the lack of sprocket clearance on modern frames makes this chain a bit of a headache

[dude...]

yeah mine still sounds rough when im cranking hard. was thinking about going down to a 25t sprocket but then itd be a pain to make the chain longer should i decide i wanna go back up to a 28.

[G]

Quick question

Ive only got a park CT7 chain breaker and the adapter does not fit. Can I just use the CT7 pin to rlove links?

https://youtu.be/ohcbhDwkt0s


G.

[streetStreet]

The CT7 worked okay. The vice technique with the brake washer probably works better though. Now I need a ratchet collar since my ti one semi to be grinding and may have Been the main issue with the previous driver.  I ended up ordering from empire.

[stevefromtexas]

I used the chain braker that odyssey made for it and it bent so I had to use my shadow one and the shadow breaker worked way better. Ps The keychain is the best chain I've ever used my drivetrain is so smooth.

[CARROTFVCKER]

still wont get one..............not long enuff to run a 39-14 on my 20..

[metalbmxer]

I used the chain braker that odyssey made for it and it bent so I had to use my shadow one and the shadow breaker worked way better. Ps The keychain is the best chain I've ever used my drivetrain is so smooth.

Agreed! Mine has been completely smooth and headache free for the past year!!!

[master]

I tried to break mine with a Pedros pro chain tool but it wouldn't fit, so I used a vice with a small socket. Worked great.

[weedbix]

FYI George I didn't get a chainbreaker adapter with my solid pin keychain. I received extra master pins instead

[G]

FYI George I didn't get a chainbreaker adapter with my solid pin keychain. I received extra master pins instead

You dont need an adaptor for the solid pin version... Adaptor is only needed on the hollow version because otherwise the pin of the chainbreaker just slides inside the pin hole... ie.That's normal.


G.

[weedbix]

oic

Edit: thought there was more to it than that

[weedbix]

I can't get mine smooth, and the only factor left is my Ratchet. Any ideas?

[MSBNL]

Driver teeth worn in?

[weedbix]

I reckon that's probably it. I've replaced my chain every 3 months since before I ever got this particular driver 3 years ago, and a brand new 510 has no problems with it, but it's the only thing left