marmoset wobble

[meathead]

has anyone else experienced this? its had a slight wobble for a few months but lately its got bigger , about 1.5mm?

isit normal?

[Mychaylo]

Its not normal no, are the aluminium collars squished? Or bearings dead?

[O.G. David]

Had the same, bearings died and i had to ditch it (like most parts as of lately).

[G]

How old is it? Could be bearings or one of the other issues mentioned. Do you have a third party hub guard on there instead of one of the original collars maybe?

Had the same, bearings died and i had to ditch it (like most parts as of lately).

The bearing units are totally standard and easy to get hold of for a few dollars...


G.

[Kyle V.]

I got some new cheap bearings to fix my wobble a couple weeks back and it sorted it out.

http://www.fasteddybearings.com/20x32x7-rubber-sealed-bearing-6804-2rs/?src=prn#ProductTabs

Buy those ones. The pair is cheaper than the cost to ship them.

[meathead]

How old is it? Could be bearings or one of the other issues mentioned. Do you have a third party hub guard on there instead of one of the original collars maybe?

Had the same, bearings died and i had to ditch it (like most parts as of lately).

The bearing units are totally standard and easy to get hold of for a few dollars...


G.

Its probably about 5+ years, got it second hand 3ish years ago  only hubgaurd on its had on are glands? seems like the axle may be squished a little

[GUMP_]

Are you running the knight guards? I found when I ran them my wheel wobbled. Put the old collars back on and it's been good since

[meathead]

Are you running the knight guards? I found when I ran them my wheel wobbled. Put the old collars back on and it's been good since

only gaurds ive ever ran are glands...

[G]

How old is it? Could be bearings or one of the other issues mentioned. Do you have a third party hub guard on there instead of one of the original collars maybe?

Had the same, bearings died and i had to ditch it (like most parts as of lately).

The bearing units are totally standard and easy to get hold of for a few dollars...


G.

Its probably about 5+ years, got it second hand 3ish years ago  only hubgaurd on its had on are glands? seems like the axle may be squished a little

5 years+ suggests bearings are the likely cause. Knock em out and check them over.


G.

[meathead]

How old is it? Could be bearings or one of the other issues mentioned. Do you have a third party hub guard on there instead of one of the original collars maybe?

Had the same, bearings died and i had to ditch it (like most parts as of lately).

The bearing units are totally standard and easy to get hold of for a few dollars...


G.

Its probably about 5+ years, got it second hand 3ish years ago  only hubgaurd on its had on are glands? seems like the axle may be squished a little

5 years+ suggests bearings are the likely cause. Knock em out and check them over.


G.

i'll give them a check later , if its not sorted i'll give you a shout , cheers

[beermx]

I just sent mine to Odyssey and they sent me a new one in under 2 weeks. (It was an ugly army green though)

[montymitch]

I need to replace the bearings in mine, but I have an aluminum guard on there that is completely seized. I'll probably have to just replace the axle.