Author Topic: Odyssey Monolever/M2 question.. (Read 6540 times)

RevShawn · « **on:** August 15, 2016, 01:41:43 PM »

Does anyone know if you can swap levers between the M2 and the Monolever? I want a Trigger M2, but they no longer exist.... I was gonna buy a Trigger Monolever and put the lever in the M2...

MSBNL · « **Reply #1 on:** August 15, 2016, 07:57:17 PM »

From what I remember the bolt holding the lever is a bit longer , the lever itsself should be interchangeable.

RevShawn · « **Reply #2 on:** August 18, 2016, 09:09:09 AM »

Thanks!

weedbix · « **Reply #3 on:** September 16, 2016, 07:50:43 PM »

The blade (wot u called lever) is the same except for the angle of the slit you slip the cable into. It works just fine. I have an M2 with mono blade and vice versa on the other brake

RevShawn · « **Reply #4 on:** September 23, 2016, 10:56:52 AM »

Quote from: Professor Horatio Hufnagel on September 16, 2016, 07:50:43 PM

The blade (wot u called lever) is the same except for the angle of the slit you slip the cable into. It works just fine. I have an M2 with mono blade and vice versa on the other brake

Thanks Prof!!!

Bikeguide.org - Bike maintenance for BMX'ers · « **Reply #4 on:** September 23, 2016, 10:56:52 AM »

Author Topic: Odyssey Monolever/M2 question.. (Read 6540 times)

RevShawn

Odyssey Monolever/M2 question..

MSBNL

Re: Odyssey Monolever/M2 question..

RevShawn

Re: Odyssey Monolever/M2 question..

weedbix

Re: Odyssey Monolever/M2 question..

RevShawn

Re: Odyssey Monolever/M2 question..

Bikeguide.org - Bike maintenance for BMX'ers

Re: Odyssey Monolever/M2 question..