The Street > Common Questions and former stickies.
common bearing and bolt/nut sizes
weedbix:
Fly gyro tabs M3 x 0.5mm
Brendan O.:
Anyone happens to know the number of the needle bearing that goes in the odyssey 9t drivers?
band aid:
proper microlite front hub bolts?
3/8"x24tpi or 10x1mm?
Boomhauer:
I want to convert my hub from 3/8 (or 10mm) to 14mm.
My hub uses 6000LS bearings which are apparently 10mm I.D. 26mm O.D. 8mm width.
Do I have any bearing options without modification?
weedbix:
http://www.google.com/#q=15mm+x+26mm+x+8mm+bearing
A slightly narrower bearing could work if you take up the space to keep the spacing at 100mm
You also need a 14mm axle with the bearing shoulders the distance apart as your 3/8" axle's ones are
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version