Bikeguide.org - Bike maintenance for BMX'ers

The Street => The Bike Shop => Topic started by: RevShawn on August 15, 2016, 01:41:43 PM

Title: Odyssey Monolever/M2 question..
Post by: RevShawn on August 15, 2016, 01:41:43 PM

Does anyone know if you can swap levers between the M2 and the Monolever? I want a Trigger M2, but they no longer exist.... I was gonna buy a Trigger Monolever and put the lever in the M2...

Title: Re: Odyssey Monolever/M2 question..
Post by: MSBNL on August 15, 2016, 07:57:17 PM

From what I remember the bolt holding the lever is a bit longer , the lever itsself should be interchangeable.

Title: Re: Odyssey Monolever/M2 question..
Post by: RevShawn on August 18, 2016, 09:09:09 AM

Thanks!

Title: Re: Odyssey Monolever/M2 question..
Post by: weedbix on September 16, 2016, 07:50:43 PM

The blade (wot u called lever) is the same except for the angle of the slit you slip the cable into. It works just fine. I have an M2 with mono blade and vice versa on the other brake

Title: Re: Odyssey Monolever/M2 question..
Post by: RevShawn on September 23, 2016, 10:56:52 AM

Quote from: Professor Horatio Hufnagel on September 16, 2016, 07:50:43 PM

The blade (wot u called lever) is the same except for the angle of the slit you slip the cable into. It works just fine. I have an M2 with mono blade and vice versa on the other brake

Thanks Prof!!!