converting F25 forks to 14mm?

[meathead]

would this void the warranty? sorry if this has been asked befor but cant seem to find a definitive answer

[Aesop Rock]

95% certain yes.

[paranoidmexican]

I'd recommend getting a 3/8ths hub.

If not maybe odyssey has some older dirt forks with 990's in 14mm?

[weedbix]

If there ever was an issue stemming from your modification you wouldn't be covered

[meathead]

I'd recommend getting a 3/8ths hub.

If not maybe odyssey has some older dirt forks with 990's in 14mm?

already own f25  forks, but found a rather decent deal on a 14mm profile 

looks like im stuck with the marmo for now .

cheers lads

[montymitch]

You can always grind the axle flat so it'll fit in the forks.

[Fundamental]

Profile has 3/8 conversion kits available.

http://www.profileracing.com/estore/product.php?productId=231

I personally would not grind out the fork, the dropout is already quite small.

[LeonLikesToRock]

looks like im stuck with the marmo for now .

Not a bad thing. Better hub and not having to grind out forks sounds like a good outcome.

[weedbix]

You can always grind the axle flat so it'll fit in the forks.

Sounds plausible but in practice it's the last thing you want to do

[dude...]

stick with the marmy, or try get hold of just the axle off a broken mini front hub on the cheap to switch out

[meathead]

Profile has 3/8 conversion kits available.

http://www.profileracing.com/estore/product.php?productId=231

I personally would not grind out the fork, the dropout is already quite small.

pretty sick of 10mm axles really and id probably never go near a profile 10mm axle haha , cheers anyway