Author Topic: Quick Questions (Read 939665 times)

Sasha · « **Reply #270 on:** May 28, 2012, 05:25:27 PM »

Lucky Strike. I put a 44t on mine for laffs.

attactrl · « **Reply #271 on:** May 28, 2012, 05:53:38 PM »

Quote from: mutinous;3564021

The creaking of powerbites is solved by greasing the spindle? My shadow cranks sound like shit and I'm 95% sure the spindle is greased. Either that or it is the noise of my ruben pedals that are bent to shit.

My Hollows would creak, Antiseized the shit out of them, no more noise.

Topsey · « **Reply #272 on:** June 01, 2012, 03:19:25 PM »

Does anyone know when the Antigram is going to be out? Its top of my list also, i want to know when i can get it. Ive got to get some new parts before hand so hopefully it will be out around the end of summer.

Meursault · « **Reply #273 on:** June 01, 2012, 03:51:58 PM »

Quote from: JohnW;3556197

I'm sure he could. It's 17mm at the ends and 14mm in the center. 14mm thick aluminum is just not enough for pegs. The early Fly axles tapered to 15mm in the middle from 17 and they broke a lot. You've got 2 good options there. Chromoly axle the size of the stock one with 17mm outer and 14 or 15mm inner, or 17mm aluminum all the way through. I'd suggest 3/8x24 either way. With 17mm 7075 all the way through you'd have the axle strength of the Vandero 2.

What no. The madera hub uses 17mm ID hub shell bearings, and 15mm ID driver bearings.

JohnW · « **Reply #274 on:** June 01, 2012, 04:22:33 PM »

Quote from: Meursault;3565261

What no. The madera hub uses 17mm ID hub shell bearings, and 15mm ID driver bearings.

Right, it'd been a while since I've had a rear one apart. I was thinking about the front hub when I made that post.

Gary · « **Reply #275 on:** June 02, 2012, 04:36:18 PM »

Quote from: hugh.;3564026

What newer frames will clear a 33t sprocket?

Fit mac I used just the thin bb bearing spacer , it's close though.

Ruben José · « **Reply #276 on:** June 12, 2012, 02:19:26 PM »

which bolts can be used with odyssey 41 thermal? wtp royal bolts work?

skateparkrider · « **Reply #277 on:** June 12, 2012, 04:52:07 PM »

Quote from: Topsey;3565250

Does anyone know when the Antigram is going to be out? Its top of my list also, i want to know when i can get it. Ive got to get some new parts before hand so hopefully it will be out around the end of summer.

Best answer I have for you right now is hopefully with in 2-3 months, but nothing is for certain on that. If they don't make it by the summer they should be in stock around the world by Sept. All of the Odyssey distros have placed orders for these hubs, which is essentially the final step before the part releases.

haaasselt · « **Reply #278 on:** June 15, 2012, 03:32:54 PM »

will going to back to a 20.75 with a longer backend, about 13.65 feel very different?
now on a 21 with 13.2/3 backend, yess I've asked this before but I'm not so familiar with chain stay lengths and how they respond

found a new fit eddie v3 for less then what I can sell my current frame for and I've always wanted one!

attactrl · « **Reply #279 on:** June 15, 2012, 03:36:32 PM »

Yes it will feel different.

Will you care, probably not. You're probably going to like the frame you wanted more than a frame you didn't want as much.

haaasselt · « **Reply #280 on:** June 17, 2012, 06:05:22 AM »

Quote from: attactrl;3569304

Yes it will feel different.

Will you care, probably not. You're probably going to like the frame you wanted more than a frame you didn't want as much.

good point, longer cs felt a lot better for airs so I guess you're right
thanks

Rusty · « **Reply #281 on:** June 17, 2012, 02:37:59 PM »

Wheres the cheapest place I can find a pair of big drop bars online?

paranoidmexican · « **Reply #282 on:** June 17, 2012, 04:30:18 PM »

i shouldn't need any tophat spacers when installing a million dollar sprocket to thunderbolts do I?

Topsey · « **Reply #283 on:** June 17, 2012, 04:34:31 PM »

^ Nope, its all 15/16ths will mate up perfectly.

blueee · « **Reply #284 on:** June 17, 2012, 05:27:04 PM »

Quote from: Rusty;3569859

Wheres the cheapest place I can find a pair of big drop bars online?

go to a flea market, you can get bars there for 10 bucks easy

Bikeguide.org - Bike maintenance for BMX'ers · « **Reply #284 on:** June 17, 2012, 05:27:04 PM »

Author Topic: Quick Questions (Read 939665 times)

Bikeguide.org - Bike maintenance for BMX'ers