Author Topic: common bearing and bolt/nut sizes (Read 133086 times)

brian itzaina · « **Reply #30 on:** February 10, 2010, 05:07:26 PM »

any one know the size and tpi for drilling and tapping a frame for removable gyro mounts?

Tubes6al4v · « **Reply #31 on:** February 10, 2010, 05:45:48 PM »

M3 x 0.5

http://www.bmx-u.com/index.php?title=Adding_Gyro_Tabs

brian itzaina · « **Reply #32 on:** February 10, 2010, 06:27:08 PM »

Thanks^

Alice Glass · « **Reply #33 on:** March 08, 2010, 04:01:46 PM »

I'm not sure this belongs on here, but I would like to know if a 16t Shimano freewheel will fit a rear Homer. Thanks

Tubes6al4v · « **Reply #34 on:** March 08, 2010, 04:27:58 PM »

Homers used to be available in both small (metric, for going down to 13t) and large (SAE? for 16+ freewheels) threads. If yours is one of the newer (Taiwan) hubs, then no, it won't work.

Alice Glass · « **Reply #35 on:** March 08, 2010, 07:26:13 PM »

Ohh, yeah I bet it's a Taiwanese because I ordered it from the Odyssey Online store, thanks for the info

Tommy A · « **Reply #36 on:** April 23, 2010, 08:33:46 AM »

Can anyone tell me the size for a Fly lever? Not the pivot bolt.

weedbix · « **Reply #37 on:** June 21, 2010, 08:27:14 AM »

M10 x 1.5mm is also Primo cranks' sprocket bolt

weedbix · « **Reply #38 on:** July 07, 2010, 03:41:26 AM »

Hoffman Solemate corner pins/nuts: M4 x 0.7mm (default/coarse thread for M4)

Allatt · « **Reply #39 on:** August 02, 2010, 11:14:20 AM »

anyone know if any bluesix bolt fits the eclat tibia spindle?
my friend stripped the stock one first go derp.
x

weedbix · « **Reply #40 on:** August 03, 2010, 03:46:39 AM »

Fly gyro tabs M3 x 0.5mm

Brendan O. · « **Reply #41 on:** September 20, 2010, 10:12:54 AM »

Anyone happens to know the number of the needle bearing that goes in the odyssey 9t drivers?

band aid · « **Reply #42 on:** October 16, 2010, 08:15:33 PM »

proper microlite front hub bolts?
3/8"x24tpi or 10x1mm?

Boomhauer · « **Reply #43 on:** December 19, 2011, 01:13:28 AM »

I want to convert my hub from 3/8 (or 10mm) to 14mm.

My hub uses 6000LS bearings which are apparently 10mm I.D. 26mm O.D. 8mm width.

Do I have any bearing options without modification?

weedbix · « **Reply #44 on:** December 19, 2011, 01:26:27 AM »

http://www.google.com/#q=15mm+x+26mm+x+8mm+bearing

A slightly narrower bearing could work if you take up the space to keep the spacing at 100mm

You also need a 14mm axle with the bearing shoulders the distance apart as your 3/8" axle's ones are

Bikeguide.org - Bike maintenance for BMX'ers · « **Reply #44 on:** December 19, 2011, 01:26:27 AM »

Author Topic: common bearing and bolt/nut sizes (Read 133086 times)

Bikeguide.org - Bike maintenance for BMX'ers