Author Topic: BG Interbike report is up. (Read 39109 times)

newbmxer · « **Reply #30 on:** October 03, 2005, 02:26:02 PM »

I'm liking that Sunday frame, and that new elementry stem. I also liked the haro frames(not a big fan of haro). Anyways..awesome report sheep

sheepdog · « **Reply #31 on:** October 03, 2005, 03:26:44 PM »

Quote from: couch

Good review Sheep, I think you pretty much showed everything that was worth showing. You missed a couple of parts, but someone will cover them soon. One thing that needs to be fixed in your review though is that the seat clamp on Robbies S3 is not a Fit. It is actually one of ours (ZodiacEng.). I think many people got confused with this because the pockets are similar to the S3 stem he is running. It was nice to meet you at the show and talk to you a little bit about everything.

I don't know, I was specifically told that was the new Fit seat clamp.

Cool to meet you too. Wish I could have stayed longer.

As for covering everything, I had little time and I tried to spend most of it meeting people. Loads of other places will cover the other stuff. I wanted the highlights as that was all I left time for. Even then I was running all over.

Basically I went to each booth, took a quick look, if nothing caught my eye, I moved on. Also, asked a few people about anything they had spotted.

sheepdog · « **Reply #32 on:** October 03, 2005, 03:28:06 PM »

Quote from: redface

i apologize if i said anything stupid, i had been drinking for 14 hours by the time i saw ya (damn you Etnies and Tip booths and your damn free beers)

good to meet you and Cory, and i hope my scar was impressive!

tom @ empire

You seemed fine, who wasn't tired and/or a little tipsy.

Just glad to meet everyone.

sheepdog · « **Reply #33 on:** October 03, 2005, 03:29:25 PM »

Quote from: newbmxer

I'm liking that Sunday frame, and that new elementry stem. I also liked the haro frames(not a big fan of haro). Anyways..awesome report sheep

That new Elementary, is not going to be made.

At least not for a while. The current one is fine.

It was a way to thumb their nose at other companies and their "light" 10oz.+ stems.

ZodiacKilla · « **Reply #34 on:** October 03, 2005, 04:05:17 PM »

Quote from: sheepdog

I don't know, I was specifically told that was the new Fit seat clamp.

Cool to meet you too. Wish I could have stayed longer.

As for covering everything, I had little time and I tried to spend most of it meeting people. Loads of other places will cover the other stuff. I wanted the highlights as that was all I left time for. Even then I was running all over.

Basically I went to each booth, took a quick look, if nothing caught my eye, I moved on. Also, asked a few people about anything they had spotted.

Sheep i would be very intersted to hear WHO told you it was the new Fit clamp...because everyone at the Fit and S&M booth is good friends to our company, and was specifically informed as to the fact that it was NOT a prototype Fit part, but a PRODUCTION ZodiacEng. part. You can check it on our myspace page: http://www.myspace.com/zodiaceng Thanks.

ZodiacKilla · « **Reply #35 on:** October 03, 2005, 04:12:57 PM »

In case of any mix ups here's a picture of the clamp at OUR display in the GreasyCombDistribution booth (next to TipPlus)...this one is anodized black..robbie asked for a raw brushed alloy one for his bike becuase it matched the raw finish better...thanks again

[/IMG]

ZodiacKilla · « **Reply #36 on:** October 03, 2005, 04:15:44 PM »

...and the one on robbies bike at the show

[/IMG]

45% · « **Reply #37 on:** October 03, 2005, 05:05:39 PM »

Quote from: IaintNOcoreyWALTERS

...and the one on robbies bike at the show

[/IMG]

yo where start selling your stuff??9star?

sheepdog · « **Reply #38 on:** October 03, 2005, 06:21:12 PM »

Quote from: IaintNOcoreyWALTERS

Sheep i would be very intersted to hear WHO told you it was the new Fit clamp...because everyone at the Fit and S&M booth is good friends to our company, and was specifically informed as to the fact that it was NOT a prototype Fit part, but a PRODUCTION ZodiacEng. part. You can check it on our myspace page: http://www.myspace.com/zodiaceng Thanks.

Actually, Rob-O said it, maybe he was joking or I miss-understood.

silence · « **Reply #39 on:** October 03, 2005, 11:56:51 PM »

That is definitely a Zodiac clamp, They gave it to Rob-o to put on for the show..So much confusion for a seat clamp..

couch · « **Reply #40 on:** October 04, 2005, 12:02:51 AM »

Quote from: sheepdog

Actually, Rob-O said it, maybe he was joking or I miss-understood.

Considering I designed, wrote the programs, setup the mill, machined, deburred, polished, and handed Robbie the clamp, I think I would know better than anyone that the clamp is not a Fit seat clamp. Not only did I make this one, I have been making these for close to four years. Look at my bike check and see how long before Interbike I posted the pictures. You can clearly see that clamp on there. Long before the Series 3 line was even thought about. In no way am I trying to start something with this, because there is nothing negative going on between Fit and us. I am simply trying to clear this up.

EI · « **Reply #41 on:** October 04, 2005, 11:39:41 AM »

bah seatclamps suck anyways. i took mine off the day I bought my bike

I liked the writing. it was like reading a movie

sheepdog · « **Reply #42 on:** October 04, 2005, 01:23:23 PM »

It was a missunderstanding, calm down you guys.

It was changed earlier today.

i_am_dirt · « **Reply #43 on:** October 05, 2005, 03:20:16 PM »

If that was a fit seat post clamp, i would of bought it. meh.

sheepdog · « **Reply #44 on:** October 05, 2005, 04:05:10 PM »

Quote from: i_am_dirt

If that was a fit seat post clamp, i would of bought it. meh.

No reason to not buy it just because it isn't.

Bikeguide.org - Bike maintenance for BMX'ers · « **Reply #44 on:** October 05, 2005, 04:05:10 PM »

Author Topic: BG Interbike report is up. (Read 39109 times)

Bikeguide.org - Bike maintenance for BMX'ers