Trusted/Un-trustworthy sellers

[ryanlopez4550]

wrong quote damn it

[ryanlopez4550]

yeah, he is a good guy to deal with  

indeed he is...

[patmedown167]

anyone dealt with PatriotBMX?

[Hank Chinaski]

Haha...my first time here and my name is right above.  Actually I was posting to say that Dan2315 and MattZ_BMX are both great buyers, and in addition Dan is an awesome seller.  MattZ sent payment quickly and was really good about keeping me updated on status of his payment.  I have sent dan some stuff and he has sent me some stuff.  He is an awesome guy to deal with and I encourage everyone dealing with him to feel comfortable, hes top notch.

[mattZ_bmx]

anyone dealt with PatriotBMX?

ya man just got my primo hub from him. he was awsome about it also kept me updated on when the m/o was ariving and stuff. hub was in exact condition that he showed and described. very good seller man i would definatly deal with him again very good guy!

[bmxkid]

big_papa_nuts=good ass deals and quick ass shipping don't be afraid to deal

[Plan B]

freebirdrider27 and kinkrida12 are both great to deal with, i love them :p

[unxetas]

First of all, I never said the sprocket was perfect, actually I said there was some usual wear. Its not as bad as you're trying to say. AND the sprocket is not bent at all, I made sure I checked that before I shipped anything.

^^^should've read that before!

I just got some cranks from AfterMidnightBMX, which had "nothing wrong with them". When I opened the package I was kinda pissed to see one bent arm, no bb spacer, no flush bolt spacers, and a bearing with a hole through the side.

Scratches, small dents, ugly paint jobs = nothing wrong
structural damage, holes, bends, missing parts = big fkn problems!

[AfterMidnightBMX]

http://www.bikeguide.org/forums/attachment.php?attachmentid=22044&stc=1

^those are the cranks he has, how do they look? pretty good condition, correct?

untexas or whatever is just upset because he messed these up in installation. I bought these cranks from ride FIT about 1-2 months ago and they were in good condition, not bent at all. I got some new bearings and a diff spindle and voila...nice cranks. These cranks are in great condition and theres nothing bent, if it was my fault in the slightest he would recieve a refund, but I they are perfectly fine, I think he just found some at a lower price and/or messed them up during installation.

Complain all you want, I'd admit if I was at fault and (most) people will back me up with this. But I think you're just a whiny child who doesnt know what he's doing and screwed them up during installation.

[unxetas]

wtf?? We are definately not talking about the same cranks. Funny how the picture of the cranks I got is the same as the ones you were selling me with the  euro bb! Which you didn't because you couldn't find the euro bearings - btw, I could've gotten cheaper cranks in the first place, but I trusted you and got f#cked. Funny you make a point of finding cheaper cranks, wouldn't that be just like what you did to fitbmx86 with the profile wheel?

here's some pics of what I got TODAY - not even a monkey could do that while attempting to install them. btw, I wouldn't even try to install cranks without a b.b. spacer, and fyi, I've been installing cranks on my bike for half of your life.

http://www.twistedeyes.com/temp/IMG_0129.jpg
http://www.twistedeyes.com/temp/IMG_0130.jpg

[AfterMidnightBMX]

holy shit, you fucked those yourself cuz they didnt leave me like that. You're insane, I dont even think those are the same cranks.

[AfterMidnightBMX]

the ones i was selling you with the euro were 175mm and werent the same pic at all, I posted the wrong pic on here (i posted the wrong one, i just posted what was titled profilecranks.jpg) but I emailed you the right one, and dont change the subject, YOU DIDNT END UP BUYING THOSE YOU BOUGHT MY 180MM WHICH WERE PICTURED IN THAT PIC.

I said it before and I'll say it again, you fucked them up yourself and you're to blame. You must have broken them during installation, otherwise it doesnt make sense. And you cant even TRY to blame it on the mail so dont try that, it wouldnt get jacked up that bad, you broke them, no one else.

[ride FIT]

I sold these to aftermidnight.  they were not the slightest bit bent, and i don't think he rode them.  To me it looks like a result of pounding or bashing.  He claims he did'nt ride them so i have no idea what happend, but i know they were not the slightest bit bent when i had them.  I'm not going to get into this arguement but i am just stating how they were when i had them.

[unxetas]

as I said on my last email to you, nope, the mail couldn't do that. even I couldn't do that in a month of riding, let alone at attempting a stupid installation without the parts I said were missing. Further proof that these are the cranks you sent me: notice the spot on the splindle boss or whatever that is called.

http://www.twistedeyes.com/temp/IMG_0136.jpg
http://www.twistedeyes.com/temp/IMG_0137.jpg

there's the same spot on your cranks:
http://www.twistedeyes.com/temp/ProfileCranks.jpg

The arm is bent outwards, there's no way to even notice that on your picture.

I can't do a thing to get my money back, so enjoy it. But don't come around calling me a child or trying to make a fool of myself, I'm neither of those. But legally, you're at least one. I hope everyone else who reads this will be smart enough to notice that noone could do that to a crank arm while attempting to install them.

[AfterMidnightBMX]

Look man I dont wanna argue with you, its stupid. But those things didnt look like that when they left me and like you just said, the mail couldnt do that, so I honestly have absoloutely no idea other than to think your lying and they were broken during installation. I dont like calling people liars, but theres no other conclusion I can draw.